The reason and treatment method for air compressor jumping

The reason and treatment method for air compressor jumping

Usually referred to as the air compressor jump, refers to the compressor overload protector being disconnected, resulting in compressor shutdown. Generally, the recovery time after the overload protector jumps open is long, and the compressor can not be used normally at this time. There are a variety of reasons for air compressor jumping, the most common is high-temperature jump.

Installation conditions of screw air compressor

Installation conditions of screw air compressor

We often encounter these problems when we go to customer sites. So today I want to talk with you about whether it is necessary to build an air compressor room, and what are the design specifications and precautions of the air compressor room?
According to the actual situation, the air compressor cover must have some, (and many users increase the sound insulation cover of the air compressor because of the influence of the sound of the air compressor).

Avoid Unnecessary Waste In The Use Of Air Compressors

Avoid Unnecessary Waste In The Use Of Air Compressors

Air Compressor is one of the most widely used in the industrial field, because of its safety, pollution-free, good regulation performance, convenient transportation and many other advantages, so that it is more and more widely used in the field of modern and automatic force.

Analysis of working principle of screw air compressor oil system

screw air compressor oil system

The oil system of screw air compressor includes oil tank, oil cooler, oil filter, oil cut-off valve, thermostat valve :
The lower volume of the oil and gas separator plays the role of the tank, and with a refueling hole, drain plug and oil level gauge.Screw-type air compressor no hydraulic pump , the lubricating oil cycle is achieved by the pressure difference between the pressure before the filter element and the air end oil injection port.